uPVC Solvent Joint Pressure Pipes
PVC Plastic Pipes and Pipe Fitting are available in vast range and in various materials, Whatever be your application… We have the Piping System – that can be installed on surface, buried, slip lined, trench less, floating and submerged. Jain PVC Plastic pipes can be used in Fluids transport include, For Lifting, Transporting, Conveying, Distributing Disposing or Tapping of Water, waste-water (drainage & sewage), compressed gases/air, odorous and corrosive gasses, chemicals and hazardous wastes/effluents. Solids conveyed include coal ash, slurries, sand and cables.
Used for conveyance of water in drip/sprinkler irrigation systems, lift irrigation systems, surface irrigation systems, subsoil drainage system, potable water supply systems, rising main and distribution lines.
uPVC Solvent Joint Pressure Pipes
Application:
Used for conveyance of water in drip/sprinkler irrigation systems, lift irrigation systems, surface irrigation systems, subsoil drainage system, potable water supply systems, rising main and distribution lines.
Features and Specifications:
Manufactured from high quality PVC compound.
Excellent corrosion and chemical resistance to most acidic and alkaline solutions.
Light weight.
Easy to handle and transport.
Excellent flow characteristics.
Smooth inner wall minimizes frictional losses and scaling due to precipitation.
Available as per IS-4985, DIN-8062 and ISO-1452-2.
Also manufactured to BS-3505/3506, ASTM D1785-84 and ASTM D 2241 on demand.
Available in sizes from 20 mm (½”) to 560 mm (20”) as per above standards.
Commonly supplied in 6 m lengths with plain ends or socketed at one end for solvent cement weld (Any other pipe length can be supplied on request).
uPVC Quick Fix Joint Pressure Pipes
Application:
Used for conveyance of water in drip/sprinkler irrigation systems, lift irrigation systems, surface irrigation systems, subsoil drainage system, potable water supply systems, rising main and distribution lines.
Features and Specifications:
Convenient push-fit joints. Saves manpower.
Jointing can be done during any time of the day under any weather conditions.
Faster installation, immediate pressure testing and commissioning possible.
Joints accommodate expansion and contraction.
Joints are resistant to soil movement due to earthquake effects.
The elastomeric rings have properties matching to Pipe with long shelf life.
Available as per IS-4985, ISO-1452-2 and DIN-8062.
Available in sizes & pressure classes shown in the table in Green colour.
PVC Injection Moulded Fittings(IMF)
Application:
Features and Specifications:
Manufactured from high quality PVC compound.
Excellent corrosion and chemical resistance to most acidic and alkaline solutions.
Exceptionally durable and highly resilient.
Moulded with precision to match the Pipes.
Conforming to IS 7834, IS 554, ISO 727, DIN 8063 standards.
Nominal pressure, PN16 with reduced safety factor of 2.5.
Note :
PVC Injection moulded fittings are also available in lower pressure rating of 6 kg/cm² (57psi) suitable for flow irrigation and low pressure piping network (Tested at 200 / 2.62 times nominal working pressure).
Fabricated fittings available for all sizes and pressure classes.
Quick Fix Fittings (fabricated) available for sizes from 63mm to 315mm and pressure classes upto 12.5 kg/cm².
Repair coupler for all sizes & pressure classes available.
PVC Fabricated Fittings
Perma Fix™ Solvent Cement
Application:
Used for joining uPVC pressure or non pressure pipes.
Features and Specifications:
- Formulated using suspension grade virgin PVC resin.
- Free flowing clear liquid.
- Fully homogenised, free from lumps and undissolved particles.
- Minimum viscosity 90 mPa.s/m² for regular bodied type, 500 mPa.s/m² for medium bodied type and 1600 mPa.s/m² for heavy bodied type.
- Lap joint shear strength 30 – 35 kg/cm² (430 – 500 psi) after 10 hours curing time under laboratory conditions.
- Hydrostatic burst strength 25-28 kg/cm² (355 – 400 psi) after 2 hours curing time.
- Available in 10, 25, 50 & 100 ml tube packing, 0.25, 0.5, 1.0, litres in tin packing & 5 litres can.
Jain PVC Well Casing & Screen Pipes
Features and Specifications:
Manufactured from special PVC compound having extra toughness.
Anti corrosive. PVC being an inert material most of the chemicals found in soil and water do not affect the casing and screen.
Continuous ribs increase permeability by keeping gravel pack away from slot opening.
Chemical rehabilitation possible when chocking occurs due to encrustation.
Horizontal slots enable laminar flow into the well reducing well entrance losses.
Higher permeability reduces draw down and results in saving in pumping energy.
Slot width right from 0.2mm to 3.00mm can be provided.
Light in weight.
The socket and spigot with suitable thread make them easy to install and requires no welding equipments and generator.
Manufactured conforming to IS:12818, DIN 4925 (part I to III) and ASTM F 480.
Casing and screen available from 1.25” dia to 20” dia.
Also available HDPE screen and casing for leachate Gas Extraction.
All accessories for well completion available.