Elbows

Molded elbows, tees, and MJ adapters are available through 8 inch diameter. Saddles and tapping saddles are also available for a broad range of sizes. Click on the link below to view and print a copy of the submittal sheet.

Fittings Submittal Sheet
How to Read a Fitting Label

Molded Butt 90° Elbow

DriscoPlex® HDPE Molded Fittings are available to meet your needs in compliance with ASTM D2513, D3261, F2880, F2897, F2880 and AWWA C906 product standards.

Made in the USA and produced from high quality HDPE material, DriscoPlex® Fittings are manufactured from NSF-61/Annex G approved PE 4710 resin as listed in PPI-TR4.

DriscoPlex® PE Fittings Advantages:

✓ Durable
✓ Leak Tight
✓ Excellent Flow
✓ Easy Install
✓ Light Weight
✓ Impact Resistant
✓ Fusibility
✓ Corrosion Resistant
✓ Chemical Resistant
✓ Life Cycle Cost
✓ Toughness
✓ Environment
 
Molded Butt 90° Elbow Info Sheet (PDF)

Molded Butt 45° Elbow

DriscoPlex® MDPE and HDPE Molded Fittings are available to meet your needs in compliance with ASTM D2513, D3261, F2897 and AWWA C906 product standards.

Made in the USA and produced from high quality MDPE and HDPE material, DriscoPlex® Molded PE Fittings are manufactured from both PE 2708 resin and NSF-61/Annex G approved PE 4710 resin as listed in PPI-TR4.

DriscoPlex® PE Fittings Advantages:

✓ Durable
✓ Leak Tight
✓ Excellent Flow
✓ Easy Install
✓ Light Weight
✓ Impact Resistant
✓ Fusibility
✓ Corrosion Resistant
✓ Chemical Resistant
✓ Life Cycle Cost
✓ Toughness
✓ Environment
 
Molded Butt 45° Elbow Info Sheet (PDF)

Molded Socket 90° Elbow

DriscoPlex® HDPE Molded Fittings are available to meet your needs in compliance with ASTM D3261 and AWWA C901 and C906 product standards.

Made in the USA and produced from high quality HDPE material, DriscoPlex® Fittings are manufactured from NSF-61 approved PE 4710 resin as listed in PPI-TR4.

DriscoPlex® PE Fittings Advantages:

✓ Durable
✓ Leak Tight
✓ Excellent Flow
✓ Easy Install
✓ Light Weight
✓ Impact Resistant
✓ Fusibility
✓ Corrosion Resistant
✓ Chemical Resistant
✓ Life Cycle Cost
✓ Toughness
✓ Environment
 
Molded Socket 90° Elbow Info Sheet (PDF)

HDPE Electrofusion Elbows (45° and 90°)

HDPE Electrofusion 45 Degree and 90 Degree Elbows are available to meet your needs in compliance with ASTM D2513, F1055, F2897, and where applicable, AWWA C906 product standards.

Electrofusion Fittings are manufactured from a PE 4710/PE100 resin as listed in PPI-TR4.

HDPE Electrofusion Elbows (45° and 90°) Info Sheet (PDF)

HDPE Electrofusion Adjustable Elbows

HDPE Electrofusion Adjustable Elbow Fittings are available to meet your needs in compliance with ASTM D2513, F1055, F2897, and where applicable, AWWA C906 product standards.

Electrofusion Fittings are manufactured from a PE 4710/PE100 resin as listed in PPI-TR4.

HDPE Electrofusion Adjustable Elbows Info Sheet (PDF)