Plastic Combination Air Valve
Model C15
BERMAD C15 is a high quality combination air valve for a variety of networks and operating conditions. It reliefs air during pipeline filling, allows efficient release of air pockets from pressurized pipes, and enables large volume air intake in the event of network draining. With its advanced aerodynamic design, this valve provides excellent protection against air accumulation and vacuum formation, with improved sealing in low pressure conditions.
Features and Benefits:
- Sֺֺtraight flow body with large diameter automatic orifice:
Higher than usual flow rates. - Aֺֺerodynamic full-body kinetic shield: Prevents premature
closing without disturbing air intake or discharge. - Dֺֺynamic sealing: Prevents leakage under low pressure
conditions (1.5 psi; 0.1 bar). - Cֺֺompact, simple and reliable structure whose parts are
fully corrosion, chemical and fertilizer resistant: Lower
maintenance and increased life span. - Dֺֺesign in compliance with EN-1074 / 4 standard
- Fֺֺactory approval and Quality Control: Performance and
specification tested and measured with specialized test
bench, including vacuum pressure conditions. - Fֺֺield proven designed for use in irrigation applications with
water quality such as river water, channel water, dam water
or treated effluent with high reliability.
Model C35
BERMAD C35 is a high quality combination air valve for a variety of irrigation networks and operating conditions. It reliefs air during pipeline filling, allows efficient release of air pockets from pressurized pipes, and enables large volume air intake in the event of network draining. With its advanced aerodynamic design, this valve provides excellent protection against air accumulation and vacuum formation, with improved sealing in low pressure conditions.
Features and Benefits:
- Sֺֺtraight flow body with large diameter automatic orifice:
Higher than usual flow rates. - Aֺֺerodynamic full-body kinetic shield: Prevents premature
closing without disturbing air intake or discharge. - Dֺֺynamic sealing: Prevents leakage under low pressure
conditions (1.5 psi; 0.1 bar). - Cֺֺompact, simple and reliable structure whose parts are
fully corrosion, chemical and fertilizer resistant: Lower
maintenance and increased life span. - Dֺֺesign in compliance with EN-1074 / 4 standard.
- Fֺֺactory approval and Quality Control: Performance and
specification tested and measured with specialized test
bench, including vacuum pressure conditions. - Fֺֺield proven designed for use in irrigation applications with
water quality such as river water, channel water, dam water
or treated effluent with high reliability.
Model C30
BERMAD C30 is a high quality combination air valve for a variety of water networks and operating conditions. It evacuates air during pipeline filling, allows efficient release of air pockets from pressurized pipes, and enables large volume air intake in the event of network draining. With its advanced aerodynamic design, this double orifice valve provides excellent protection against air accumulation and prevents vacuum formation, with improved sealing in low pressure conditions.
Features and Benefits:
- Straight flow body with large diameter automatic orifice – Higher than usual flow rates.
- Aerodynamic full-body kinetic shield – Prevents premature closing without disturbing air intake or discharge.
- Dynamic sealing – Prevents leakage under low pressure conditions (0.1 bar).
- The boss on the base can be tapped with a thread for pressure gauge connection, check point or test drain for air valve function.
- Compact, simple and reliable structure whose parts are fully corrosion, chemical and fertilizer resistant – Lower maintenance and increased life span.
- Designed in compliance with EN-1074 / 4 standard.
- Factory approval and Quality Control – Performance and specification tested and measured with specialized test bench, including vacuum pressure conditions.
Model C10
BERMAD C10 is a high quality combination air valve for a variety of irrigation networks and operating conditions. It evacuates air during pipeline filling, allows efficient release of air pockets from pressurized pipes, and enables large volume air intake in the event of network draining. With its advanced aerodynamic design and double orifice, this valve provides excellent protection against air accumulation and vacuum formation, with improved sealing in low pressure conditions.
Features and Benefits:
- Straight flow body with large diameter automatic orifice – Higher than usual flow rates.
- Aerodynamic full-body kinetic shield – Prevents premature closing without disturbing air intake or discharge.
- Dynamic sealing – Prevents leakage under low pressure conditions (0.1 bar).
- Compact, simple and reliable structure whose parts are fully corrosion, chemical and fertilizer resistant – Lower maintenance and increased life span.
- Designed in compliance with EN-1074 / 4 standard.
- Factory approval and Quality Control – Performance and specification tested and measured with specialized test bench, including vacuum pressure conditions.
- Field proven designed for use in irrigation applications with water quality such as river water, channel water, dam water or treated effluent with high reliability.
Kinetic Air Valve Model K10
BERMAD K10 is a high quality kinetic air valve for a variety of irrigation networks and operating conditions. It evacuates air during pipeline filling and enables large volume air intake in the event of network draining. With its advanced aerodynamic design and kinetic orifice, this valve provides excellent protection against vacuum formation, with improved sealing under low pressure conditions.
Features and Benefits:
- Straight flow body with large diameter orifice – High flow rates.
- Aerodynamic full-body kinetic shield – Prevents premature closing without disturbing air intake or discharge.
- Dynamic sealing – Prevents leakage during operation even under low pressure conditions (0.1 bar).
- The boss on the base can be tapped with a thread for pressure gauge connection, check point or test drain for air valve function.
- Compact, simple and reliable structure whose parts are fully corrosion, chemical and fertilizer resistant – Lower maintenance and increased life span.
- Factory approval and Quality Control – Performance and specification tested and measured with specialized test bench, including vacuum pressure conditions.
Kinetic Air Valve Model A30
BERMAD A30 is a high quality automatic air release valve that allows efficient release of air pockets from pressurized pipes. With its advanced design, this valve provides excellent protection against air accumulation with improved sealing in low pressure conditions.
Features and Benefits:
- Straight flow body with large diameter automatic orifice – High flow rates.
- Dynamic sealing – prevents leakage under low pressure conditions (0.1 bar).
- Compact, simple and reliable structure with fully corrosion-resistant parts;
lower maintenance and increased life span. - Designed in compliance with EN-1074 / 4 standard and water service standards.
- Factory approval and Quality Control – Performance and specification tested
and measured with specialized test bench.
Sewage & Wastewater Combination Air Valve C50
BERMAD C50 is a high quality combination air valve for a variety of sewage and wastewater networks and operating conditions. It evacuates air during pipeline filling, allows efficient release of air and gas pockets from pressurized pipes, and enables large volume air intake in the event of network draining. With its advanced aerodynamic design and double orifice, this valve provides excellent protection against air and gas accumulation and vacuum formation with improved sealing under low pressure conditions.
Features and Benefits:
- Straight flow body with large diameter automatic orifice – Higher than usual flow rates.
- Aerodynamic, full-body kinetic shield – Prevents premature closing without disturbing air intake or discharge.
- Dynamic Sealing – Prevents leakage under low pressure conditions (0.1 bar).
- Elongated body design – Prevents solids from making contact with valve’s operating parts.
- Compact, simple and reliable structure with fully corrosion-resistant parts – Lower maintenance and increased life span.
- Two inlets – Enabling back flushing and drainage.
- Factory approval and Quality Control – Performance and specification tested and measured with specialized test bench, including vacuum pressure conditions.
Plastic Vacuum Breaker 1/2″- ARV
The exclusive AR Series products, manufactured from high quality plastics and metals, offer outstanding features and advantages:
- Perfect sealing under very low system pressure
- High flow capacity
- Patented operation together with smart design
- Simple, compact and reliable product
Features and Benefits:
- Only one or two moving parts, depending on model
- Corrosion resistant construction
- Pressure balanced float, free of distortion or collapse
- Special drip tight dynamic seal
- Exclusive kinetic design prevents floats from being blow shut
- Perfect sealing under system pressure as low as 0.1 bar